Rapid Changes in Grade

Rapid changes in gradients are always difficult, particularly when utilising a large dimensional paving unit.

To accommodate these changes in grade and ensure that the finished project is aesthetically pleasing with zero 'lipping' of paver edges, the paver unit dimension requires altering.

This may be achieved by simply specifying a smaller paver size in the area of gradient change. Incorporating this smaller unit size in the overall layout and design of the project will create a pleasing featuring that will enhance the overall appearance of the pavescape.

Alternatively, creating a 'cut line' at the point of gradient change within the paving body will accommodate the deflection required to eliminate unnecessary 'lipping' of paver edges.

When the paving is laid on 45 o bond, this 'cut line' at the point of gradient change may be accomplished by installing UrbanStone 45 o paving halves - thus avoiding unnecessary cutting residue, waste and cost.

A typical example of an area requiring the installation of a gradient change line would be at the pavement pram-ramp entry and exit as demonstrated in the adjacent illustration.